Voltage Drop calculator

Estimate circuit voltage drop from wire size, material and load current.

Estimated voltage drop
4.76 V

One-way run of 100 ft.

Breakdown & share
Voltage drop
3.97%
Estimated receiving voltage
115.24 V
Resistance per conductor
1.5882 Ω/1,000 ft
Estimates only.

Your inputs

Resistance input

Example values. Change any of them.

V
A
ft
°C
More options

How it’s worked out

See how we got 4.76 V

Approximate drop = phase factor × current × length × (R cos φ + X sin φ) ÷ parallel conductors. The factor is 2 for two-wire circuits or √3 for balanced three-phase.

  1. Use 1.5882 Ω per 1,000 ft conductor resistance.
  2. Apply the phase factor and entered load to get 4.7647 V of estimated drop.

About this calculator

Use manufacturer impedance data for installed cable. Wire-gauge mode uses ideal conductor resistance and an estimated temperature adjustment. Circuit sizing and electrical-code compliance require design checks beyond voltage drop.

Worked example

Estimated voltage drop · 4.76 V

Approximate drop = phase factor × current × length × (R cos φ + X sin φ) ÷ parallel conductors. The factor is 2 for two-wire circuits or √3 for balanced three-phase.

  1. Use 1.5882 Ω per 1,000 ft conductor resistance.
  2. Apply the phase factor and entered load to get 4.7647 V of estimated drop.

Common questions

Should I enter one-way or round-trip length?

Enter one-way length. The phase factor accounts for the circuit configuration.

What basis does the three-phase result use?

Enter line current and line-to-line supply voltage for a balanced three-phase circuit.

Where do I find cable impedance?

Use the manufacturer’s resistance and reactance per 1,000 feet for the installation method.

Formula sources

Reference checked November 22, 2026.